Address: Decheng District, Dezhou, Shandong
Precautions for adding lubricating oil to screw jacks.The screw jack is composed of worm gear, box, bearing, screw and other parts.The working principle is: the motor or manual drives the worm to rotate, the worm drives the worm to decelerate and rotate, and the inner cavity of the worm is processed into...
Precautions for worm gear screw elevators leaving the factory for 24 hours: Normally, the running-in phase of worm gear screw elevators after leaving the factory is about 24 hours. The need to pay attention to the running-in phase is to operate stably to avoid unnecessary misoperation.And when the worm gear screw rises and falls...
The component of the planetary gear transmission is generally proportional to the component of the gear, and the component of the gear is closely related to its data and heat treatment hardness.For example, under the same power, the component of the carburized and quenched gear will be about 1/3 of the component of the quenched and tempered gear. ...
What are the faults and elimination methods of hard tooth surface reducer?The reducer heats up and leaks oil.In order to improve the power of the worm gear reducer, non-ferrous metals are generally used as the worm gear, and the worm is made of harder steel because it is a sliding friction transmission. During the operation...
The causes of gear reducer coupling defects mainly include the following two aspects: lack of oil or lack of oil in the coupling of lifting parts.Or the improper use of grease results in calcification of the grease, causing the tooth surfaces to not be smooth, or the tooth surface is not smooth enough, and the tooth surface wears severe...