Gearing Arrangement: Worm
Output Torque: 2.6-1195N.M
Rated Power: .06-11KW
Input Velocity: 1400R/MIN
Output Pace: 14-280R/MIN
Model Number: 571-150 nmrv worm gearbox / velocity reducer
Ratio: 5,7.5,ten,fifteen,twenty,25,30,forty,50,sixty,eighty,ninety,one hundred
Shade: SLIVER,BLUE,BLACE,Grey
Bearing: SKF,NAK
Certification: ISO9001-2000
Gearing Arrangement:: worm wheel with shaft
Shipment time: 15-20days
Lubrincant: syhthetic or mineral
Warranty: 1 year
Housing: Aluminium Alloy/Casting Iron
Mount situation: Foot Mounted, Flange mounted
Packaging Information: Internal pack: use plastic bag and foam box, Coupling Company disc coupling High High quality non-common tailored elastic diaphragm coupling forty five# steel Outer pack: carton or picket situation for every established or based mostly on customer’s request.
Port: HangZhou/ZheJiang

one:900 Ratio Very good Cost Double Reduction Worm Equipment Velocity ReducerStructure

Supplies:
Worm: interior is nodular forged iron, outside the house is #94 bronze
Wheel: 20Crmoti metal (Carburizing)
Output shaft: #forty five steel raw materal
Bearing: UBC manufacturer
Housing: aluminum with oven painting for NMRV030-090, forged iron for NMRV110 and 130
Oil seal: CZPT AND NAK

Traits:(1)Large output torque(2) Risk-free, reputable, inexpensive and durable(3) Secure transmission, silent operation(4)High heat-radiating efficiency, substantial carrying ability(5) Combination of 2 single-action worm gear velocity reducers, assembly the specifications of tremendous velocity ratio

Technical data:(1) Iput power:.06kw-15kw(2) Output torque:4-2320N.M(3) Pace ratio: 100-3000(4) With IEC input flange: 56B14/71B14/80B5/90B5…

Coloration:(1) Blue / Gentle blue(2) Silvery White
Top quality handle(1) Top quality promise: 1 calendar year(2) Certificate of quality: ISO9001:2000(3) Each and every merchandise must be analyzed just before sending

Operation&mantenance

(1)When worm speed reducer starts off to function up to200-400 hrs, its lubricant need to be replaced.(2)The gearbox need to substitute the oil following 4000 hrs.(3)Worm reduction gearbox is fully stuffed with lubricant oil right after finshed assembly.(4)Lubricanting oil should be stored adequate in the casing and checked at a fastened time.

Dimension

Packaging & ShippingInner packing: pp bag with cartonOuter packing: Wood caseShipment:20days following acquired the deposit

Organization Data
HangZhou Wanxing reducer Co.,Ltd is set up in 1999 and is a expert maker and supplier of NMRV,VF,WP,PLANETARY gearbox/reducer. It is situated in HangZhou Metropolis of China,with simple access to air port and sea port.
Our company now opeartes with a lot more than 100pieces of products and go the ISO9001:2000 certification. In purchase to improve our merchandise,we’ Excavator undercarriage sprocket CZPT PC100-1PC120-1 113-27-21410 ve recognized a investigation and improvement section with experienced experts. We also just take part in some exhibitions these kinds of as the Cantan fair,the Hannover Mess.

CertificationsEC Declaration of conformity

Our ServicesAs a result, we can provise each common and non-normal NMRV gearboxed to meet up with customer’s demands.
1.Large high quality product—-Our tenet is “top quality initial”.Excellent materials,precise production procedures
and rigorous top quality handle can develop superb quality.
two.Competitive price—-We have our very own manufacturing facility,scientific generating,direct-marketing.So we can help save the cost and provide reduced value.
three.Professional—-Our skilled engineer can reply complex concerns,aid you resolve specialized difficulties and support you select the most suitable item according to your requirements.
four.Supply fast—-We are near port,and we have specialist forwarder.Products can be despatched out within 1 to 10 functioning times based on get quantity.
five.Very best service—-Answering e-mails or fixing questions timely.Delivery and update data on time.
FAQ
1, Q: What is your enterprise sort?A: Manufacturer2, Q: What is your main items?A: Energy transmission gearboxes and gears.Such as: industrial HB gearbox, worm/helical/bevel/planetary gearbox, customed gears, and many others.3, Q: What about your guarantee?
A:twelve to eighteen months guarantee in accordance to various items and life span provider.4, Q: What’s your MOQ?A: 1 piece for diverse gearboxes.
five, Q: Can you supply customized gearboxes or gears?
A: Yes, RX a hundred rear sprocket CORONA China leading quality we can. Primarily count on your requirements.
6, Q: What information need to be presented, if I want to purchase gearbox?
A: Gearbox ratio, kind, input velocity, rated power, Mounting place, Much more information, much better!

seven,Q:What about the payment?
A:T/T thirty%progress,balance towards copy B/L(L/C at sight can be take)

eight,When you can get our reply after inquiry?
A:We have expert staff do operate for distinct buyers, so you can be sure to get the reply inside of 24 hrs.

Dear buddies, if you are fascinated in any designs of us, pls make contact with us, we will reply you inside of 24 hours,expecting your mail.

What is a worm gear reducer gearbox?

A worm gear reducer gearbox is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer gearbox can increase the output torque of the engine according to the gear ratio. This type of gear reducer gearbox is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.

Hollow shaft worm gear reducer gearbox

The hollow shaft worm gear reducer gearbox is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducer gearboxes are usually used in combination with helical gear reducer gearboxes. The latter is mounted on the input side of the worm gear reducer gearbox and is a great way to reduce the speed of high output motors. The gear reducer gearbox has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducer gearboxes are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer gearbox. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducer gearboxes can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer gearbox, be sure to choose the correct one according to your requirements.

Double throat worm gear

Worm gear reducer gearboxes use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
The pitch diameter and working depth of the worm gear are important. The pitch circle diameter is the diameter of the imaginary circle in which the worm and the gear mesh. Working depth is the maximum amount of worm thread that extends into the backlash. Throat diameter is the diameter of the circle at the lowest point of the worm gear face.
When the friction angle between the worm and the gear exceeds the lead angle of the worm, the worm gear is self-locking. This feature is useful for lifting equipment, but may be detrimental to systems that require reverse sensitivity. In these systems, the self-locking ability of the gears is a key limitation.
The double throat worm gear provides the tightest connection between the worm and the gear. The worm gear must be installed correctly to ensure maximum efficiency. One way to install the worm gear assembly is through a keyway. The keyway prevents the shaft from rotating, which is critical for transmitting torque. Then attach the gear to the hub using the set screw.
The axial and circumferential pitch of the worm gear should match the pitch diameter of the larger gear. Single-throat worm gears are single-threaded, and double-throat worm gears are double-throat. A single thread design advances one tooth, while a double thread design advances two teeth. The number of threads should match the number of mating gears.

Self-locking function

One of the most prominent features of a worm reducer gearbox is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer gearbox can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducer gearboxes. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer gearbox is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer gearbox is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer gearbox is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer gearbox is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Heat generated by worm gears

Worm gears generate considerable amounts of heat. It is essential to reduce this heat to improve the performance of the gears. This heat can be mitigated by designing the worms with smoother surfaces. In general, the speed at which worm gears mesh should be in the range of 20 to 24 rms.
There are many approaches for calculating worm gear efficiency. However, no other approach uses an automatic approach to building the thermal network. The other methods either abstractly investigate the gearbox as an isothermal system or build the TNM statically. This paper describes a new method for automatically calculating heat balance and efficiency for worm gears.
Heat generated by worm gears is a significant source of power loss. Worm gears are typically characterized by high sliding speeds in their tooth contacts, which causes high frictional heat and increased thermal stresses. As a result, accurate calculations are necessary to ensure optimal operation. In order to determine the efficiency of a gearbox system, manufacturers often use the simulation program WTplus to calculate heat loss and efficiency. The heat balance calculation is achieved by adding the no-load and load-dependent power losses of the gearbox.
Worm gears require a special type of lubricant. A synthetic oil that is non-magnetic and has a low friction coefficient is used. However, the oil is only one of the options for lubricating worm gears. In order to extend the life of worm gears, you should also consider adding a natural additive to the lubricant.
Worm gears can have a very high reduction ratio. They can achieve massive reductions with little effort, compared to conventional gearsets which require multiple reductions. Worm gears also have fewer moving parts and places for failure than conventional gears. One disadvantage of worm gears is that they are not reversible, which limits their efficiency.

Size of worm gear reducer gearbox

Worm gear reducer gearboxes can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer gearbox has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducer gearboxes great for space-saving applications. They also have low initial costs.
Worm gear reducer gearboxes are one of the most popular types of speed reducer gearboxes. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Worm gears can also be adjusted. A dual-lead worm gear has a different lead on the left and right tooth surfaces. This allows for axial movement of the worm and can also be adjusted to reduce backlash. A backlash adjustment may be necessary as the worm wears down. In some cases, this backlash can be adjusted by adjusting the center distance between the worm gear.
The size of worm gear reducer gearbox depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.

editor by Cx 2023-06-29