ep

March 23, 2020

Worm get gearbox with motor
worm motor
A robust worm-drive gearbox powered by an MM28 electric motor. Ideal applications where an easy to match, high torque output is required. Ideal for student based projects including robots and buggies.
The unit has been designed to ensure that the output shaft can be ‘clicked’ in and out for modification. Electronic.g. cutting down to size. The electric motor is snap installed into its cradle to activate the apparatus and worm.
Details
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
Overall dimensions of box + electric motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor is not turning. The high gear ratios of 216:1 or 336:1 get this to gearbox appropriate for little walking robots, lifting mechanisms, and various other applications where great torque is desired.
The low-voltage motors in the worm gearbox operate on 1.5-4.5 volts and draft to a few amps, making them ideal applicants for the DRV8833 motor driver carrier. Engine overheating can be due to excessive stalling, even at very low voltages. We recommend that you utilize stall-detection sensors, or just watch your robot, to make sure that it doesn’t stall for lots of seconds at the same time.
This gearbox has a 4 mm diameter, round output shaft, which works together with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal mounting hub also matches on the smaller threaded end of the shaft, although it is not especially intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical correct angle worm geared motors set new specifications for reliability, performance and economy with unparalleled features which includes hollow shafts in the tiniest sizes. An inverter friendly style provides for easy integration right now and a really future proof answer. The Ever-Power gear engine offers total flexibility in mounting choices includes shaft, base, encounter, and flange alternatives. The engine terminal box could be mounted in choice positions rotated in 90º steps around the electric motor frame providing for unparalleled integration options.
Ever-Power gear motors adhere to UNITED STATES and International criteria, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total remedy for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dirt tight and hose evidence,and can be used outdoors or in wet and dusty environments without the use of additional enclosures. Complete rated output is offered by the result shaft of the machine.
Product Features
Power rating up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Connect connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the alternative for applications requiring a good corner turn, optional dual output, or perhaps an inability for the engine to be back again driven. The DC correct angle equipment motors are made for continuous and intermittent duty procedure. Our right angle equipment reducers are designed with a number of mounting plate choices, making them ideal for a variety of DC electric motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
FEATURES
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ time (varies by application)
EP Products Worm Equipment Motors are created to generate high torque in a little package size. Worm Equipment Motors are excellent for applications that want a self- locking or breaking characteristic since the output shaft can’t rotate when there’s no power applied. Additionally, Worm Gearheads can transfer motion in 90 degrees. With various decrease ratios, precision lower gears, voltages and sizes, EP Products has a DC Worm Gear Motor solution for the application.
Features and Benefits
Very High Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Ability to Handle Large Gear Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Applications
Protection Door Locks / Industrial Conveying Systems / Security Gates / Dental care Seats / Ambulance Cots & Stretchers Many of our DC Motors can be complimented with among our Worm Gearheads. EP Items will continue to work with you to design and produce a Worm Gear Engine which will optimize the overall performance of your unique application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Voltage
Output Speed
Power
Current
Torque
Reduction Ratio
Shaft Material & Size
Gear Material
Shaft Configuration: (D Chop / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Extra Assembly Requirements (lead wires, connectors, etc.)
INTRODUCTION
The turbo metal gear worm motor runs on the metal gear box for sturdiness and a high torque output. Due to the special mechanical framework of the worm drive the motor output shaft is certainly self locking and can not be rotated.
This part uses a two wire connection and supports direction control as well as PWM speed control. Ranked voltage is 12v and can accomplish 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear devices from EP DRIVESYSTEMS especially display their power in applications where great gear ratios are essential. Our worm geared motors will be as a result optimally suited for use in intralogistics, packaging technology and the food & beverage industry.
Four great known reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the travel system.
Corrosion protection
The NSD tupH sealed surface conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users optimum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are many applications that require drive systems, and each of these has its unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear products impress with their high power density and compact style. If required, we are able to also supply them with the highly effective nsd tupH surface treatment.
In addition to the basic EP housing, we offer an extensive line of bolt-on elements to customize the product including torque arms, shaft addresses and output flanges. These could be easily field set up, but we will also be glad to assemble the individual components for you.
Find out more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear devices feature a smooth, corrosion-resistant alluminum alloy housing. Optional nsd tupH surface area conversion makes this product ideally suited for harsh and challenging industries like food processing and pharmaceuticals.
Flexible input designs such as NEMA, IEC or immediate motor mounts in additional foot or flange mounted casing designs.
Worm geared motors
Worm geared motors for little power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared motor program. The units have got on all sides diverse repairing possibilities and enable an easy assembling for the client.
Other drive configurationscan be designed by use of built-on add-ons (e.g. torque arm and output flanges). The housings are created in light weight construction out of aluminium die cast. Electric motor attachment is realised generally by way of IEC adapter B5 or B14A.
Technical Data
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/mounting:uniblock, flange, torque arm
Buy Worm Get Gearbox with Engine – incorporating the next features: 1 to 6V voltage rating, 17100 rpm no load swiftness, 220g-cm stall torque, 3mm shaft size, 60mm long, 35mm large, 40mm high, a good robust worm get gearbox powered by an MM28 electric motor (included), most ideal for applications where an easy to match, high torque end result is necessary, nylon housing and equipment, requires light oil or silicon grease lubrication, ideal for student based projects including robots and buggies.
Most ideal for applications where an easy to fit, high torque end result is required
Perfect for student based tasks including robots and buggies
Reversible Substantial torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Reversible Large torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Features:
The electric motor is Gear DC engine with micro-turbine worm, you can change the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that’s, regarding motor without electrical, the result axis can be fixed, self-lock.
The reducer output shaft arranged vertically with the motor shaft, whole motor output shaft relatively-short than general gear engine, trusted to be installed the dimensions requirements strictly occasion.
Specifications:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the windowpane, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s engine is essential to avoid your robot being pushed by your opponent robot. The worm gear is definitely an improved option compared to the spur gear motor. How come worm gear so unique? Take a look wiki out: Worm Travel.
“Unlike with ordinary equipment trains, the path of transmission (insight shaft vs result shaft) isn’t reversible when using large reduction ratios, due to the better friction involved between your worm and worm-wheel, when usually an individual start (one spiral) worm can be used. This is normally a advantage when it’s desired to eliminate any probability of the result driving the input.”
In other words, it is hard to push your load (example, your robot) if the motor is not power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking because of the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g