Address: Decheng District, Dezhou, Shandong
Before starting the gear reducer, press to check whether the oil level in the reducer meets the requirements.Follow the prompts to turn on or change the breather cap to make it ventilate smoothly, and check whether the roll is maneuverable.Before the load test, run for about half an hour with no load, and confirm that the no-load and no end barriers can be loaded...
Precautions for adding lubricating oil to the screw jack.The screw jack is composed of worm gear, box, bearing, screw and other parts.The working principle is: the motor may manually drive the worm to rotate, the worm drives the worm wheel to decelerate and rotate, and the inner cavity of the worm wheel is processed...
Precautions for worm gear screw lifts for 24 hours before leaving the factory: Normally, the running-in phase of worm gear screw lifts after leaving the factory is about 24 hours. During the running-in phase, attention should be paid to stable operation to avoid unnecessary misoperation.And when the worm gear screw rises and falls...
When using gear reducer equipment, there will always be some unexpected incidents.Sudden illnesses are those that develop rapidly and have a mutational nature.So many repairers have to deal with this phenomenon.One load cracking refers to the part...
The worm gear reducer shall not be hammered by gravity to avoid damage to the housing of the reducer; regularly check whether the installation foundation, seals, and drive shafts are normal.For normal use, the high temperature of the lubricating oil should be less than 85°C.The oil temperature rises abnormally, and abnormal noise occurs...