When the rv reducer equipment is in operation, heat energy will be generated, which will increase the overall temperature of the equipment, which may affect the performance and use of the equipment, so we have to find a way to reduce the temperature. Let’s take a look at how it is. Cooling:
1. The equipment cooling coil in the oil sump of the tank, the cooling water in the pipe takes away part of the heat of the lubricating oil.
2. Electric fan cooling, add an electric fan to the extension shaft of the worm to increase heat dissipation to cool down.
3. Install radiating fins outside the rv reducer to increase the radiating surface.
4. The lubricating oil external circulation equipment of the reducer equipment reduces the oil temperature.
The cooling methods of the rv reducer are mainly the four mentioned in the article. You should cool down according to the actual situation. In addition, the operating temperature of the reducer should be controlled at -40°C~40°C. When the ambient temperature is lower than 0°C, before starting It should be heated to fully dissolve the lubricating oil or use lubricating oil with a low freezing point.
