In order to increase the torque, the rv reducer often runs with a motor during use, but the motor often has a phase loss problem during the operation, which not only affects the normal use of the reducer, but also affects the operator in severe cases. The health caused a certain amount of maintenance.So, how should we solve the problem of lack of phase in the power supply of the rv reducer?
1. Check carefully whether the power circuit of the rv reducer has a disconnect switch and whether there is a fuse.
2. Check whether each phase of the three-phase winding is interrupted.
3. Restart the power supply of the reducer. If the motor fails to start due to a blocking fault, and there is a buzzing sound, the power supply should be cut off in time.
4. If the power cable is disconnected, find out the disconnection point and replace the fuse of the same specification.
The lack of power supply is related to whether the rv reducer can be used normally. When the equipment has a lack of power phase during use, we should solve it in time according to the above methods, so as not to affect the normal use of the reducer.
