Address: Decheng District, Dezhou, Shandong
When installing the gear reducer, the center axis of the transmission should be centered, and the error should not exceed the supplementary amount of the coupling used.Good alignment can extend the service life and obtain the ideal transmission frequency.When installing transmission parts on the output shaft, hammers are not allowed...
The more obvious manifestation of the fatigue of the gear reducer is that even if it is simply the damage to the four-roller bearings or gears, one case is caused by an identity problem, and the other is caused by improper selection.Once this is the second one, we can do our best and through the long method of component parts...
Fast damage speed: Due to the influence of the processing, installation and debugging of the new gear reducer components, the touch area of the partner surface is small, and the allowable torque is large.During the turnover process of the gear reducer, the rough and uneven sections on the surface of the parts fit into each other,...
During the use of the gear reducer, we found that there would be a pool of oil on the ground, and oily substances leaking from the chassis we referred to it as oil leakage. By opening the actual picture, we made a few analysis. ...
Following the development of industry, the gear reducer played a great role in the process of childbirth; but if health preservation is not favored, the destruction of the gear reducer will cause unnecessary economic losses to the cooperative; in fact, the gear reducer Job life can go through proper sanitation...