Address: Decheng District, Dezhou, Shandong
Precautions before the device The shaft of the device should be cleaned before using the machine.And check whether there are bumps or dirt on the shaft of the device.The operating temperature of the reducer is 0-40 ℃.Check the fit of the hole (or shaft) connected with the reducer...
Cycloidal pinwheel reducers must comply with certain standards and be properly applied under the specified standards during the entire process of specific application.In addition, problems such as grease, working voltage, and application site must also be considered.Cycloidal pinwheel reducer is composed of three parts, namely...
As a new type of transmission system, the cycloidal pinwheel reducer is based on the basic theory of the large planetary transmission system. It completes the operation according to the gearing of the pinwheel and is composed of input, output, and speed reduction equipment. It consists of three parts, only the three...
When changing the oil of the planetary gear reducer, wait for the planetary gear reducer to cool down. There is no risk of ignition, but it should still be humid and hot. After the complete cooling, the viscosity of the oil will increase, and it will be difficult to add a little oil. Please...
The planetary gear reducer should be firmly installed on a stable base or base, the oil in the oil drain groove should be able to be removed, and the air cooling circulation system should be smooth.Basically unreliable, it will cause vibration and noise during operation, and promote rolling bearings and transmission gears...